-
1
If necessary, unscrew and remove any hardware or shelves from console table.
-
2
Turn console table to its side, to be able to remove legs safely and effectively.
-
3
Use a hand saw or circular saw to remove the legs of the table. Use proper safety equipment including safety glasses and/or ear protection.
-
4
Insert new legs according to their instructions.
-
5
Clean all surfaces of the table with a bucket of soapy water and sponge to remove dirt and oils.
-
6
Sand the surface inside and out of the console table. Wipe excess dust with a damp cloth.
-
7
Using a 2” brush to apply Premium Wall & Wood Primer to any interior or exterior areas a roller would not get.
Note: *If painting on bare wood, use Extreme Bond if an adhesion primer is needed.
-
8
Use a mini roller to apply the primer to the rest of the remaining areas. Let dry.
-
9
Use a 2” brush to apply Emerald Urethane Trim Enamel (Ancestral Gold SW 6407) to the interior edges of the console table.
-
10
Use a mini roller to paint the remainder areas. Let dry.
-
11
Use tape to protect the freshly painted interior while painting the exterior.
-
12
Use a 2” brush to paint Emerald Urethane Trim Enamel (Merlot SW 2704) to exterior corners and areas a roller will not be able to get.
-
13
Use a mini roller to paint the remainder areas. Let dry.
-
14
Remove tape and add a complimentary touch to your interior space by replacing the handles. Enjoy!
-
15
The BEFORE & AFTER…
WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
Close
