Current Order

How to Paint a Ceiling

A dining room with warm neutral walls and white ceiling and trim.

Painting your ceiling is a project that often gets overlooked despite its low cost and ability to deliver transformative results. While completing this task can be slightly messy, the results will have you spending more time admiring the fifth wall in your room - whether you're painting your living room or bathroom ceiling. And you'll be glad to know that you have the friendly experts at Sherwin-Williams to help along the way! We're happy to provide this comprehensive guide outlining how to paint a ceiling, including detailed instructions and insightful tips to keep you on track for beautiful results.

Cost: $
Skill Level: Beginner
Duration: 1 day

A room prepped for a ceiling to be painted.
STEP 1

Prepare the Room

Like painting a wall, properly preparing your ceiling and room will help ensure results you like. Start by clearing as much furniture from the room as you can. Then, cover the remaining furniture and flooring with plastic sheeting or old blankets to protect them from paint drips or spatter. If you plan to remove the texture from your ceiling, begin that process after you've covered your furniture and floor to simplify clean-up.

Tip: Removing your ceiling fixtures and vents makes it easier to paint your ceiling. However, it is vital to turn off the power to electrical fixtures before detaching them from the ceiling.

A person cutting in with a brush on a ceiling.
STEP 2

Tape the Edges & Cut In

Next, apply painter's tape along the edges of your walls where they meet the ceiling. Then, use an angled bristle brush to paint a 2" to 3" strip around the entire ceiling using Sherwin-Williams Premium Ceiling Paint. Creating this edge will help you avoid getting paint on the walls later. Be sure to start each stroke away from the edge and work towards the tape while feathering the edges.

Tip: If you plan to paint the walls after you've revamped your ceiling, you can skip the taping and paint down the wall a few inches instead. When it's time to paint the walls, you can tape off the ceiling instead.

Tip: We encourage you to use a quality primer for ceilings with water damage or other stains. Consider using Sherwin-Williams Extreme Block Interior/Exterior Stain Blocking Waterbased Primer to prevent imperfections from showing through the final coating.

Using a roller to paint a ceiling.
STEP 3

Paint the Ceiling

While the paint is still wet around the edges of your ceiling, start applying paint to the rest of the surface. We recommend attaching your roller to an extension pole to make this process more manageable without needing a ladder. For the best results, start in a corner and paint straight, overlapping rows until the entire ceiling is covered.

Tip: Use a low-nap roller cover if your ceiling is smooth and untextured. Otherwise, use a higher nap, like 3/4-inch, for textured ceilings. The thicker roller cover will help the paint reach deeper pockets in your textured ceiling, promoting a more uniform finish.

Removing painter's tape from trim.
STEP 4

Remove Painter's Tape & Reattach Ceiling Fixtures

Lastly, remove the painter's tape while the paint is still wet to create a crisp, clean border. Then, you can move furniture back into the space and remove drop cloths. After the paint fully dries, you can begin reattaching fixtures and vents. Once this step is complete, you can enjoy the breathtaking look of your freshly painted ceiling and its positive impact on the space overall.

FAQs