Skip navigation

Sherwin-Williams provides a full range of coating solutions to protect and beautify every area of your educational facility.  Your local Sherwin-Williams representative can assist in developing specifications for your performance, budget, deadline and VOC requirements.

View Education Facility Guide

Interior Finishes

 

Harmony® Zero VOC Interior Acrylic Latex

Contains odor eliminating technology to reduce common indoor odors and help rooms stay fresher longer. Delivers very good hide and withstands frequent washings. Anti-microbial agents resist mildew formation on the paint surface. Formaldehyde reducing technology in the flat and eg-shel helps promote better indoor air quality by reducing VOCs from possible sources like insulation, carpet, cabinets and fabrics. Has achieved GREENGUARD GOLD Certification.*

 

ProMar® 200 Zero VOC Interior Latex

The first complete professional line that not only has zero VOCs, but is also available in four sheens and all colors including accents. Delivers excellent durability, hide and touch-up. Meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

Dry Erase Coating

Allows you to turn any wall into a dry erase board without sacrificing the wall's original color. Dries to a smooth, clear gloss surface that is non-yellowing, with no ghosting or shadowing. Has achieved GREENGUARD GOLD Certification.*

High Performance Finishes

 

Pro Industrial® Water Based Catalyzed Epoxy

High-performance coating that is extremely hard and tough with exceptional resistance to abrasion, impact, corrosion, chemicals, stains, scrubbing, and blocking. Flows and levels to a smooth finish and meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

Pro Industrial® Acrylic Coating

Easy-to-apply coating for commercial spaces. This high-performance acrylic is for interior or exterior use. It has exceptional stain and corrosion resistance, is fast drying, flows and levels to a smooth finish and it meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

Pro Industrial® Pre-Catalyzed Water Based Epoxy

Advanced toughness and durability in a single-component coating. It is resistant to most commercial cleaners and has excellent stain blocking properties. Flows and levels to a smooth finish with effortless application and meets the most stringent VOC regulations.

 

Pro Industrial® Urethane Alkyd Enamel

A general-purpose maintenance enamel fortified with urethane resin for durability and flexibility. It provides good exterior color and gloss retention and flows and levels to a smooth finish. It has excellent stain resistance and stain blocking properties.

 

Pro Industrial® Multi-Surface Acrylic

A surface-tolerant utility coating with exceptional stain blocking properties. Self-priming directly to multiple surfaces with excellent one-coat hide and adhesion. Excellent exterior gloss and color retention and excellent stain resistance. Dries fast with dryfall properties.

 

Waterborne Acrylic Dryfall

Dries to a removable dust in an approximate 10-foot fall. Excellent hide and compliance with the most stringent VOC regulations.

Exterior Finishes

 

Duration® Exterior Acrylic Coating

Formulated with PermaLastâ„¢ technology which results in a thick, flexible layer for excellent hide and protection from peeling and blistering. Duration provides a mildew resistant coating. It is self-priming and requires just one coat for repaints and two coats for new work.

 

Resilience® Acrylic Exterior Latex

Provides outstanding hide and durability plus ease of application. With Resilience, the threat of rain or dew will not slow down or delay the job because it is specially formulated with MoistureGuardâ„¢ technology, which resists moisture twice as fast as standard exterior latex coatings.

 

Loxon® Exterior Concrete and Masonry Solutions

From conditioner to surfacer to primer and topcoats, Loxon coatings are formulated to withstand extreme sun, rain, heat, humidity and salt air. Loxon coatings also bridge hairline cracks, and resist high pH, alkalinity, efflorescence, chalking, fading and mildew for beautiful color and sheen that lasts. In addition, Loxon clear waterproofers and sealers protect concrete and masonry from water penetration.

Floor Coatings

 

Armorseal® Floor Coatings

A broad range of epoxies, urethanes, primers and patches for light to heavy traffic areas combining both aesthetic appeal and high performance.

 

General Polymers® Terrazzo

Terrazzo is comprised of a matrix material used to bond the flooring to the substrate, as well as bond a variety of aggregates within the floor. The design of the floor can mix and match several terrazzo matrix colors and aggregate selections to complete this unique flooring surface, customized for each installation.

 

General Polymers® FasTop™ Flooring System

Designed for fast installation, quick return to service and long-lasting performance. Cures rapidly with excellent chemical resistance and is moisture-tolerant during and after installation. Combines waterbased urethane resins with cement and unique aggregates for tough environments.

App Server Details

generated on: Tue Mar 19 07:12:50 UTC 2024

Host: tsapp-86cb4467f6-8gn8t

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.