Masonry

The ease of a one-part coating. The waterproof protection of a two-part.

Features:

• Single-component, waterbased formula
• Superior moisture protection
• Low VOC
• Skid-resistant, breathable finish
• Bridges hairline cracks and reduces prep work
• Tintability to hundreds of colors
• Ideal for pool decks, walkways, patios, and interior basement walls

If budget and environmental concerns are at the top of your list, Loxon Siloxane Repellant is your ideal choice. Boasting zero VOCs, it has quickly become a favorite among those looking to protect the planet as well as their concrete projects.

Features:

• Ideal for large commercial masonry and concrete structures
• Protects against wind-driven rain and chloride attack
• Does not mar glass or flashing for minimal prep and clean-up
• Meets ASTM standards for water repellency

Specifically engineered for exterior, above-grade, masonry surfaces requiring high performance protection.

Features:

• Highly alkali and efflorescence resistant
• Provides a highly durable and weather-resistant finish
• May be applied to a surface with a pH of up to 13
• The topcoat contains agents that inhibits growth of mildew on coating surface
• For concrete, cement composition panels, concrete block, brick, and stucco

This 100% acrylic emulsion conditioner penetrates and seals new or previously painted exterior surfaces to bond light chalk to the surface for excellent topcoat adhesion.

Features:

• Prevents adhesion problems and delamination
• Apply to fresh concrete after just 7 days
• Accepts a wide range of topcoats
• For concrete, stucco, block, tilt-up, or brick

Long-lasting exterior waterproof protection against wind-driven rain.

Features:

• High-elongation — cracks do not reappear
• Prevents water penetration on new work or repaints
• Highly permeable
• Resists efflorescence

Economical protection from wind-driven rain.

Features:

• Maintains a fresh appearance and reduces callbacks
• Prevents water damage
• Covers and hides hairline cracks
• Resists efflorescence

Ideal for enhancing tilt-up surfaces. Hides irregularities and imperfections.

Features:

• Uniform finish
• Good color retention
• Store tint custom colors
• Waterborne and solvent-borne formulas

Solvent-borne has:

• Superior tolerance to marginally prepared surfaces
• Superior resistance to fade and efflorescence
• Applies in low temperatures down to 20°F

Add color and weather protection to large commercial concrete structures, such as parking garages, stadium supports and sound barriers.

Features:

• Especially for pre-cast tilt-up concrete
• Excellent color uniformity
• Resists fade and efflorescence
• Acts as a water repellent
• Allows moisture transfer
• 15-minute drying and re-coating time

Acrylic patches uniquely designed to improve the appearance of any masonry surface by filling, bridging, and sealing cracks and openings.

Features

• Provides a flexible, durable, elastomeric and weatherproof seal
• Assures uniform appearance of topcoats
• Conceals surface flaws, creates even, smooth finish
• For cracks, voids and openings on walls, ceilings and around window and door surrounds

A clear siloxane water repellent designed to weatherproof old and new concrete floors and driveways.

Features:

• Superior resistance to spalling, cracks and stains
• Protects against salt and weather
• Exceeds stringent federal waterproofing specs
• Lasts longer than water-based alternatives
• Dries clear, prevents discoloration

Enhanced waterborne technology keeps interior & exterior concrete and wood floors looking newer longer.

Features:

• Low LOV, 50 g/l
• Waterborne formula that's easy to clean up
• Advanced resistance to household chemicals
• Meets low slip rating required by the Americans with Disabilites Act
• Tintable - available in many colors

For interior and exterior concrete, block and stucco, this lightweight, 100% acrylic resin surfacer smooths and uniforms surfaces and eliminates pinholes.

Features:

• Excellent filling and sealing properties
• Lightweight technology acrylic resin weights 30% less than concrete block fillers
• Alkali resistant (from 8 to 13 pH)
• Use at temperatures down to 35°F
• For interior and exterior poured and precast concrete, concrete block, cinder block and stucco

Wide variety of H&C branded sealers, water repellents and stains.