Commercial Facility Illustration Guides
Sherwin-Williams provides a full range of coating solutions to protect and beautify every area of your commercial facility. Your local Sherwin-Williams representative can assist in developing specifications for your performance, budget, deadline and VOC requirements.
Project ProfilesColor Story Newsletter
Commercial Specifications Guide
Interior Finishes
Harmony® Zero VOC Interior Acrylic Latex
Contains odor eliminating technology to reduce common indoor odors and help rooms stay fresher longer. Delivers very good hide and withstands frequent washings. Anti-microbial agents resist mildew formation on the paint surface. Formaldehyde reducing technology in the flat and eg-shel helps promote better indoor air quality by reducing VOCs from possible sources like insulation, carpet, cabinets and fabrics. Has achieved GREENGUARD GOLD Certification.*
ProMar® 200 Zero VOC Interior Latex
The first complete professional line that not only has zero VOCs, but is also available in four sheens and all colors including accents. Delivers superior durability, hide and touch-up. Meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*
ProClassic® Enamels
Exceptional adhesion, excellent flow and leveling, non-yellowing and a unique wet and dry hide makes ProClassic an excellent choice for doors and trim, cabinets and furniture. ProClassic Enamels feature all the benefits of waterbased enamels without sacrificing adhesion, durability and block resistance.
Dry Erase Coating
Allows you to turn any wall into a dry erase board without sacrificing the wall's original color. Dries to a smooth, clear gloss surface that is non-yellowing, with no ghosting or shadowing. Has achieved GREENGUARD GOLD Certification.*
High Performance Finishes
Pro Industrial® Water Based Catalyzed Epoxy
High-performance coating that is extremely hard and tough with exceptional resistance to abrasion, impact, corrosion, chemicals, stains, scrubbing, and blocking. Flows and levels to a smooth finish and meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*
Pro Industrial® Acrylic Coating
Easy-to-apply coating for commercial spaces. This high-performance acrylic is for interior or exterior use. It has exceptional stain and corrosion resistance, is fast drying, flows and levels to a smooth finish and it meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*
Pro Industrial® Pre-Catalyzed Water Based Epoxy
Advanced toughness and durability in a single-component coating. It is resistant to most commercial cleaners and has excellent stain blocking properties. Flows and levels to a smooth finish with effortless application and meets the most stringent VOC regulations.
Pro Industrial® High Performance Epoxy
An extremely hard and tough coating with exceptional durability and chemical resistance. Apply direct-to-metal for excellent corrosion resistance. A high solids, high build coating, it has excellent scrubbability and resists stains and blocking.
Pro Industrial® Urethane Alkyd Enamel
A general-purpose maintenance enamel fortified with urethane resin for durability and flexibility. It provides good exterior color and gloss retention and flows and levels to a smooth finish. It has excellent stain resistance and stain blocking properties.
Pro Industrial® Multi-Surface Acrylic
A surface-tolerant utility coating with exceptional stain blocking properties. Self-priming directly to multiple surfaces with excellent one-coat hide and adhesion. Excellent exterior gloss and color retention and excellent stain resistance. Dries fast with dryfall properties.
Waterborne Acrylic Dryfall
Dries to a removable dust in an approximate 10-foot fall. Excellent hide and compliance with the most stringent VOC regulations.
Exterior Finishes
Duration® Exterior Acrylic Coating
Formulated with PermaLast™ technology which results in a thick, flexible layer for excellent hide and protection from peeling and blistering. Duration provides a mildew resistant coating. It is self-priming and requires just one coat for repaints and two coats for new work.
Resilience® Acrylic Exterior Latex
Provides outstanding hide and durability plus ease of application. With Resilience, the threat of rain or dew will not slow down or delay the job because it is specially formulated with MoistureGuard™ technology, which resists moisture twice as fast as standard exterior latex coatings.
Loxon XP® Masonry Coating
This direct-to-concrete and masonry high build coating offers maximum performance in one less coat, with no need for priming. Using proprietary technology, Loxon XP goes on thick to provide exceptional resistance to alkali, efflorescence and wind-driven rain. Meets the most stringent VOC regulations.
Floor Coatings
ArmorSeal® Floor Coatings
A broad range of epoxies, urethanes, primers and patches for light to heavy traffic areas combining both aesthetic appeal and high performance.
UltraCrete Texture Coating
Provides an attractive, economical textured finish for masonry substrates, and is especially good for adding interest to tilt-up surfaces. The spray-on formula minimizes surface irregularities and imperfections for an attractive final appearance that lasts.
General Polymers® Terrazzo
Terrazzo is comprised of a matrix material used to bond the flooring to the substrate, as well as bond a variety of aggregates within the floor. The design of the floor can mix and match several terrazzo matrix colors and aggregate selections to complete this unique flooring surface, customized for each installation.
General Polymers® FasTop™ Flooring System
Designed for fast installation, quick return to service and long-lasting performance. Cures rapidly with excellent chemical resistance and is moisture-tolerant during and after installation. Combines waterbased urethane resins with cement and unique aggregates for tough environments.
Sherwin-Williams offers a wide range of products engineered to stand up to the harsh conditions unique to parking structures including:
- Water repellents
- Concrete stains
- Epoxy injections
- Urethane systems
A variety of sealants for maximum performance and flexibility are available including SHER-MAX,™ White Lightning™ Polyurethane and Flame Buster.™
From stampable overlays and textures, color hardeners and densifiers, solid and semi-transparent stains or dyes and clear sealers, Sherwin-Williams H&C® Concrete Coatings have the solutions that stand the test of time and help you complete your design vision. With our complete portfolio of decorative concrete products for sidewalks, patios and driveways, you can be sure that we can help you meet demanding budgets, timelines, and performance requirements.
Sherwin-Williams has a complete selection of pavement marking solutions including waterborne and solvent-based coatings. Our industry-leading products provide cost-effective performance, durability, reliability and compliance.
A wide selection of name-brand carpeting, vinyl, wood and ceramic flooring plus 24-hr turn and reliable installation.
Designed to protect original roof systems and help extend the building’s life cycle. With up to 90% reflectivity, surface temperatures are reduced resulting in decreased cooling costs and energy savings.
