A rough, crinkled paint surface, which occurs when uncured paint forms a "skin".

• Paint applied too heavily.
   
• Painting under extremely hot conditions or cool damp conditions, which causes the paint film to dry faster on top than on the bottom.
   
• Exposure of uncured paint to rain, dew, fog, or high humidity levels.
   
• Applying topcoat of paint to insufficiently cured primer or first coat of paint.
   
• Painting over contaminated surface (e.g., dirt or wax).

 

• Scrape or sand to remove the wrinkled coating; sand the surface smooth to blend it in to the surrounding coating. Make sure the surface is thoroughly clean.
   
• If needed, prime bare areas with the appropriate primer, allowing it to dry completely.
   
• Reapply the coating following the label and data page instructions for spreading rate and environmental conditions.

PRIMER
(if needed)
Premium Wall & Wood Interior Latex
Multi-Purpose Interior Oil-Based/Undercoater
Loxon Concrete & Masonry
 

SUGGESTED FINISH
Reapply the same or an upgrade coating.
 

See Interior Paints

CAULK
ProSelect® 1230A, 1100A, or Kitchen & Bath 

PRIMER
(if needed)
Exterior Latex Wood Primer
Loxon Concrete & Masonry
All Surface Enamel Primer

See Exterior Paints