Transparent (Poor Hiding)

Failure of dried paint to obscure or hide (e.g. ability to fully conceal painted surface) the underlying color or surface to which it is applied.

Applying too thin of a paint film.
Use of paint with low hiding characteristics.
Use of a paint that is much lighter or darker than the previous coat.
Use of the wrong type or nap size of roller cover. Use of the wrong type or size of brush.
Painting over a porous surface that absorbs the coating.
Poor flow and leveling.
Thinning/reducing the coating.

Follow label and data page directions for the appropriate film build (e.g. thickness of each coating layer).
Prime the surface with the appropriate Sherwin-Williams Color Prime® system of gray-shaded primers for the color of the topcoat.
Determine the correct roller cover type or nap based on the coating being applied and the surface to be coated. On smooth surfaces, a mohair, 1/4", or 3/8" roller nap is usually sufficient. On textured surfaces, a 3/4" nap or greater is needed.
Prime porous surfaces before topcoating.
Allow proper drying time before recoating.

PRIMER
(if needed)
Premium Wall & Wood Interior Latex
Multi-Purpose Interior Oil-Based/Undercoater
Loxon Concrete & Masonry

SUGGESTED FINISH
Duration Home®
Cashmere®
SuperPaint®
ProClassic®, or reapply the same coating

PRIMER
(if needed)
Exterior Latex Wood Primer
Loxon Concrete & Masonry
All Surface Enamel Primer

SUGGESTED FINISH
Duration®
SuperPaint®
A-100®
WoodScapes®
ConFlex®, or reapply the same coating

Sherwin-Williams