Skip navigation

 

DESCRIPTION

Downward "drooping" of the paint film immediately after application, resulting in an uneven coating. 

POSSIBLE CAUSE


  • Application of too heavy a coat of paint.
     

  • Application in excessively humid and/or cool conditions.
     

  • Application of over-thinned paint.
     

  • Painting over a glossy surface, which does not provide enough of a profile to which the coating to adhere to.
     

  • Painting over a surface contaminant.

SOLUTION

See Lead Information
 

  • If paint is still wet, immediately brush out or re-roll to redistribute the excess evenly.
     

  • If the paint has dried, sand and reapply a new coat of paint.
     

  • Do not thin the paint unless recommended on the label or data page.
     

  • Follow label and data page directions for the appropriate environmental conditions for the coating.
     

  • Sand glossy surfaces dull to provide a profile for the coating to adhere to.
     

  • Follow label and data page directions for the appropriate spreading rate (e.g., the recommended total area that can be painted) for the product. Two coats of paint at the recommended spread rate are better than one heavy coat.

INTERIOR

SUGGESTED FINISH
Reapply the same or an upgrade coating.
         
See Interior Paints

EXTERIOR

SUGGESTED FINISH
Reapply the same or an upgrade coating.
  
See Exterior Paints

App Server Details

generated on: Fri Mar 29 05:38:35 UTC 2024

Host: tsapp-86cb4467f6-nrwqj

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.