Failure of dried paint to obscure or hide the underlying color or surface to which it is applied.


  • Applying too thin of a paint film.
  • Use of paint with low hiding characteristics.
  • Use of a paint that is much lighter or darker than the previous coat.
  • Use of the wrong type or nap size of roller cover. Use of the wrong type or size of brush.
  • Painting over a porous surface that absorbs the coating.
  • Poor flow and leveling.
  • Thinning/reducing the coating.


See Lead Information.

  • Follow label and data page directions for the appropriate film build.
  • Prime the surface with a white primer, the appropriate P-Shade primer for the color, or a primer shaded towards the topcoat color.
  • Determine the correct roller cover based on the coating being applied and the surface. On smooth surfaces, a mohair, 1/4", or 3/8" roller nap is usually sufficient. On textured surfaces, a 3/4" nap or greater is needed.
  • Prime porous surfaces before topcoating.
  • Allow proper drying time before recoating.