Skip navigation

DESCRIPTION

Small circular, crater-like openings that appear during or shortly after the application.

POSSIBLE CAUSE

  • Painting over surfaces contaminated with oil, wax, silicone, grease, etc.
     

  • Use of thinner/reducer in place of a solvent cleaner.
     

  • Spraying over previously repaired areas containing "fisheye eliminator" additive.

SOLUTION

See Lead Information.
 

  • Remove wet paint film with solvent, clean and refinish.
     

  • Add the recommended fisheye eliminator and respray the affected area.
     

  • If fisheyes appear in a basecoat, allow the color to flash then spray a mist coat over affected area. Do not use fisheye eliminator in undercoats or basecoat color.
     

  • If the paint has dried, sand to a smooth finish below the fisheye cratering and refinish.
     

  • Thoroughly clean the surface to be painted with detergent and hot water, followed by the recommended solvent cleaner. Wipe dry with clean rags.
     

  • Install an air filtering system that removes and prevents oil and moisture contamination.
     

  • Maintain air supply by draining, cleaning and changing filter(s) on a routine basis.


INTERIOR

EXTERIOR

App Server Details

generated on: Thu Mar 28 07:17:52 UTC 2024

Host: tsapp-86cb4467f6-8gn8t

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.