Skip navigation

Sherwin-Williams provides a full range of coating solutions to protect and beautify every area of your manufacturing/distribution facility.  Your local Sherwin-Williams representative can assist in developing specifications for your performance, budget, deadline and VOC requirements.

View Manufacturing / Distribution Facility Guide

Interior Finishes

 

Duration® Interior Acrylic Latex

Contains odor eliminating technology to reduce common indoor odors and help rooms stay fresher longer. Delivers very good hide and withstands frequent washings. Anti-microbial agents resist mildew formation on the paint surface. Formaldehyde reducing technology in the flat and eg-shel helps promote better indoor air quality by reducing VOCs from possible sources like insulation, carpet, cabinets and fabrics. Has achieved GREENGUARD GOLD Certification.*

 

ProMar® 200 Zero VOC Interior Latex

The first complete professional line that not only has zero VOCs, but is also available in four sheens and all colors including accents. Delivers excellent durability, hide and touch-up. Meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

ProClassic® Water Based Enamels

Exceptional adhesion, excellent flow and leveling, non-yellowing make ProClassic an excellent choice for doors and trim, cabinets and furniture. ProClassic Enamels feature all the benefits of water based enamels without sacrificing adhesion, durability and block resistance.

 

Dry Erase Coating

Allows you to turn any wall into a dry erase board without sacrificing the wall’s original color. Dries to a smooth, clear gloss surface that is non-yellowing, with no ghosting or shadowing. Has achieved GREENGUARD GOLD Certification.*

High Performance Finishes

 

Pro Industrial Water Based Catalyzed Epoxy

High-performance coating that is hard and tough with exceptional resistance to abrasion, impact, corrosion, chemicals, stains, scrubbing and blocking. Flows and levels to a smooth finish and meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

Pro Industrial Acrylic Coating

Easy-to-apply coating for commercial spaces. This acrylic is for interior or exterior use. It has exceptional stain resistance, is fast drying, flows and levels to a smooth finish and it meets the most stringent VOC regulations. Has achieved GREENGUARD GOLD Certification.*

 

Pro Industrial Pre-Catalyzed Water Based Epoxy

Advanced toughness and durability in a single-component coating. It is resistant to most commercial cleaners and has excellent stain resistance. Flows and levels to a smooth finish with effortless application and meets the most stringent VOC regulations.

 

Pro Industrial High Performance Epoxy

A hard and tough coating with exceptional durability and chemical resistance. A high solids, high build coating, it has excellent scrubbability and resists stains and blocking.

 

Pro Industrial Urethane Alkyd Enamel

A general-purpose maintenance enamel fortified with urethane resin for durability. It provides good exterior color and gloss retention and flows and levels to a smooth finish. It has excellent stain resistance and stain blocking properties.

 

Pro Industrial Multi-Surface Acrylic

A surface-tolerant utility coating with excellent stain blocking properties. Selfpriming directly to multiple surfaces with excellent one-coat hide and adhesion. Excellent exterior gloss and color retention and excellent stain resistance. Dries fast with dryfall properties.

 

Pro Industrial Waterborne Acrylic Dryfall

Dries to a removable dust in an approximate 10-foot fall. Excellent hide and compliance with the most stringent VOC regulations.

Exterior Finishes

 

Duration® Exterior Acrylic Coating

Formulated with PermaLast technology which results in a thick, flexible layer for excellent hide and protection from peeling and blistering. Duration provides a mildew resistant coating. It is self-priming and requires just one coat for repaints and two coats for new work.

 

Resilience® Exterior Acrylic Latex

Provides outstanding hide and durability plus ease of application. With Resilience, the threat of rain or dew will not slow down or delay the job because it is specially formulated with MoistureGuard&trade technology, which resists moisture twice as fast as standard exterior latex coatings.

 

Loxon XP® Masonry Coating

This direct-to-concrete and masonry high build coating offers maximum performance in one less coat, with no need for priming. Using proprietary technology, Loxon XP goes on thick to provide exceptional resistance to alkali, efflorescence and wind-driven rain. Meets the most stringent VOC regulations.

 

UltraCrete Texture Coating

Provides an attractive, economical textured finish for masonry substrates, and is especially good for adding interest to tilt-up surfaces. The spray-on formula minimizes surface irregularities and imperfections for an attractive final appearance that lasts.

Floor Coatings

 

ArmorSeal® Floor Coatings

A broad range of epoxies, urethanes, primers and patches for light to heavy traffic areas combining both aesthetic appeal and high-performance.

 

General Polymers® High-Performance Floors

A comprehensive line of high performance industrial and decorative floor coatings offering outstanding durability and aesthetics. Products include epoxies, urethanes, slurries and trowel mortar systems.

Chemical Resistant Finishes

 

Primary & Secondary Containment Coatings

A full portfolio of chemical resistant coatings and linings for chemical storage areas, battery recharge, secondary containment and interior tank lining applications.

App Server Details

generated on: Tue Mar 19 01:31:49 UTC 2024

Host: tsapp-86cb4467f6-8gn8t

Server Port: 443

Local Port: 5443

Instance: server1

It took 0 milliseconds to generate this page.